10K_6SSP_FLNG_4_5m_100C - 10K Type-II Thermistor Temperature Sensor with 4in Stainless Steel Probe, flange mount, and 5m long wire. Rated for 100C flushmount The epoxy is hardened and

The epoxy is hardened and highly water resistant

NOTE: you have the option to power this sensor over ethernet by using a PoE switch OR you can use an external power supply to power the sensor using the 2-pin power plug on the PCB

or Relay Outputs

If additional I/O points are necessary

10K_6SSP_FLNG_4_5m_100C - 10K Type-II Thermistor Temperature Sensor with 4in Stainless Steel Probe, flange mount, and 5m long wire. Rated for 100C flushmount The epoxy is hardened andPart #: 10K_6SSP_FLNG_4_5m_100C This 10K Type II Thermistor temperature sensor has a 4 inch long Stainless Steel Probe with a 6mm diameter and a 5m long cable. It also features a wide operating temperature range and a mounting flange that makes it easy to mount and insert the probe into a chamber. The thermistor element is epoxied into the tip of the Stainless Steel probe resulting in a sensor that is quite sensitive and responds quickly to changes in