1WT_6SSP_1_3m_2w_Molex: 1-Wire Temperature probe with 3m cable terminated by Molex Connector stainless steel probe Cable is approx 1ft long

Cable is approx 1ft long

Specific application firmware is available to suit special

Multiple sensors can be daisy chained on a single CAT5 network that can extend up to 200 meters or more in a typical environment

RS232 & Ethernet Port to interface with other systems

1WT_6SSP_1_3m_2w_Molex: 1-Wire Temperature probe with 3m cable terminated by Molex Connector stainless steel probe Cable is approx 1ft longPart #: 1WT_6SSP_1_3m_2w_Molex This Stainless Steel 1 wire digital temperature probe uses a 3 meter long jacketed cable and is terminated by a popular Molex connector. Heat shrink is used to provide an additional seal and strain relief at the junction between the stainless steel tube and the sensor cable. Heat shrink is also used at the connector end to protect the wires that are terminated in the Molex connector. The 1 wire sensor element used is a